NX-240 Rádio Transceptor VHF NXDN (digital e analógico) para uso profissional. Compatível com IDAS
Kenwood
Parcelamento com PagSeguro
1x R$ 2.006,63 |
2x R$ 1.003,32 (sem juros) |
3x R$ 668,88 (sem juros) |
4x R$ 501,66 (sem juros) |
5x R$ 401,33 (sem juros) |
6x R$ 362,48 (com juros) |
7x R$ 314,23 (com juros) |
8x R$ 278,07 (com juros) |
9x R$ 249,97 (com juros) |
10x R$ 227,50 (com juros) |
11x R$ 209,14 (com juros) |
12x R$ 193,85 (com juros) |
13x R$ 180,93 (com juros) |
14x R$ 169,86 (com juros) |
15x R$ 160,29 (com juros) |
16x R$ 151,92 (com juros) |
17x R$ 144,54 (com juros) |
18x R$ 138,00 (com juros) |
Juros de 2.35% ao mês - *Parcelamento em 18x disponível para algumas bandeiras de cartão, de acordo com a política do Pagseguro |
NX-240 Rádio Transceptor VHF | |
NEXEDGE® radios employ NXDN®, an FDMA digital air interface with AMBE+2™ voice coding technology, unique filtering and a 4-level FSK modulation technique with low bit error rate (BER) even at weak RF signal strengths.
AMBE+2™ VOCODER technology accurately replicates natural human speech nuances for superior voice quality, even at highway speeds. Additionally, the powerful 36mm-diameter speaker delivers up to 1 watt audio output, providing undeniably clearer and crisper audio.
RF output power is 5W for both VHF (NX-240V) and UHF (NX-340U). Additionally, the UHF frequency coverage on the NX-340U is 70MHz.
The slim contours and ergonomic design of the NX-240/340 make it comfortable to hold, while the dimples on both sides ensure a firm grip.
The NX-240/340 can be used with two conventional zones, offering up to 16 channels per zone.
The NX-240/340 is effectively two radios in one – analog and digital – operating on 12.5kHz/25kHz in analog zones, and on 6.25kHz/12kHz NXDN® in digital zones (Ver.02 only). For convenience, a PF key can be used to switch between zones.
Digital communications are more spectrum-efficient and offer wider area coverage than analog.
Compatible with NEXEDGE® Digital Conventional Mode, this radio offers 64 RAN (Radio Access Numbers) and individual & conference group calling to ensure expeditious communications.
Confidentiality in radio communications is a KENWOOD priority, and helping to maintain a high level of security in analog mode is a 16-code voice inversion scrambler, while robust NXDN® encryption is available in digital mode.
The optional KMC-48GPS Speaker Microphone will enable GPS tracking applications to work with the NX-240/340. GPS data can be transmitted at programmed timing, or upon receiving a request.
DIGITAL: • Over-The-Air Alias (TX only) • Paging Call • Individual Call & Conference Group Call • Status Messaging • Remote Monitor* • Site Roaming* • Late Entry • NXDN® ESN
ANALOG: • FleetSync®, MDC-1200, DTMF • QT/DQT/2-tone • Compander • Squelch Level
GENERAL: • Multiple Scan • 4-Color LED (Blue / Red / Green / Orange) • 2 PF Keys • 16-Position Mechanical Selector • Zone / Channel Number Voice Announcement • VOX Ready • Emergency Call • Remote Stun/Kill • Lone Worker Alert (per channel) • Time Out Timer • Busy Channel Lockout • Low Battery Warning • Battery Saver • KPG-169D Windows® FPU • Wireless Cloning • Password Protection • PTT Release Tone • Minimum Volume • Mic Sense • MIL-STD-810 C/D/E/F/G • IP54/55 Water & Dust Intrusion
*Available in the future
NX-240 | NX-340 | ||
---|---|---|---|
GENERAL | |||
Frequency Range | 136-174 MHz | C:400 – 470 MHz C6:350 - 400 MHz |
|
Number of Channels | 32 | ||
Zones | 2 | ||
Max. Channels per Zone | 16 | ||
Channel Spacing | Analog Digital |
12.5kHz / 25kHz 6.25kHz / 12.5kHz |
|
Operating Voltage | 7.5V DC ± 20% | ||
Battery Life 5-5-90 during hi-power battery saver: |
OFF/ON with KNB-45L (2000mAh) | Approx. 10/12 hours | |
Operating Temperature Range | -22°F ~ +140F° (-30°C ~ +60°C) | ||
Frequency Stability | ±2.0ppm | ±1.0ppm | |
Antenna Impedance | 50 Ω | ||
Dimensions (W x H x D) | With KNB-45L, Projections Not Included |
2.13 x 4.8 x 1.39 in (54 x 122 x 35.3 mm) | |
Weight (net) | Radio only With KNB-45L |
5.8 oz (165 g) 9.9 oz (281 g) |
RECEIVER | ||
---|---|---|
Sensitivity | Digital Analog (12 dB SINAD) |
0.25 μV 0.25 μV |
Selectivity | Analog | 60 dB |
Intermodulation Distortion | Analog | 60 dB |
Spurious Response | Analog | 70 dB |
Audio Distortion | Less than 10% | |
Audio Output | 1 W / 12 Ω (Internal Speaker) 500mW / 8 Ω (External Output) | |
TRANSMITTER | ||
RF Power Output | High / Low | 5 W / 1 W |
Spurious Response | 70 dB | |
FM Hum & Noise | Analog | 40 dB |
Audio Distortion | Less than 10% | |
Modulation | 11K0F3E, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D |
Specifications are subject to change without notice, due to advancements in technology.
Measurements made per TIA/EIA-603 and Specification are typical.
FleetSync® is a registered trademark of JVCKENWOOD Corporation.
Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.
AMBE+2™ is a trademark of Digital Voice Systems Inc.
NXDN® is a registered trademark of JVCKENWOOD Corporation and Icom Inc.
NEXEDGE® is a registered trademark of JVCKENWOOD Corporation.
Applicable MIL-STD & IP
MIL Standard | MIL 810C Methods/ Procedures |
MIL 810D Methods/ Procedures |
MIL 810E Methods/ Procedures |
MIL 810F Methods/ Procedures |
MIL 810G Methods/ Procedures |
---|---|---|---|---|---|
Low Pressure | 500.1/ Procedure I |
500.2/ Procedure I, II |
500.3/ Procedure I, II |
500.4/ Procedure I, II |
500.5/ Procedure I, II |
High Temperature | 501.1/ Procedure I, I |
501.2/ Procedure I, II |
501.3/ Procedure I, II |
501.4/ Procedure I, II |
501.5/ Procedure I, II |
Low Temperature | 502.1/ Procedure I |
502.2/ Procedure I, II |
502.3/ Procedure I, II |
502.4/ Procedure I, II |
502.5/ Procedure I, II |
Temperature Shock | 503.1/ Procedure I |
503.2/ Procedure I |
503.3/ Procedure I |
503.4/ Procedure I, II |
503.5/ Procedure I |
Solar Radiation | 505.1/ Procedure I |
505.2/ Procedure I |
505.3/ Procedure I |
505.4/ Procedure I |
505.5/ Procedure I |
Rain | 506.1/ Procedure I, II |
506.2/ Procedure I, II |
506.3/ Procedure I, II |
506.4/ Procedure I, III |
506.5/ Procedure I, III |
Humidity | 507.1/ Procedure I, II |
507.2/ Procedure II, II |
507.3/ Procedure II, III |
507.4 | 507.5/ Procedure II |
Salt Fog | 509.1/ Procedure I |
509.2/ Procedure I |
509.3/ Procedure I |
509.4 | 509.5 |
Dust | 510.1/ Procedure I |
510.2/ Procedure I |
510.3/ Procedure I |
510.4/ Procedure I, III |
510.5/ Procedure I |
Vibration | 514.2/ Procedure VIII, X |
514.3/ Procedure I |
514.4/ Procedure I |
514.5/ Procedure I |
514.6/ Procedure I |
Shock | 516.2/ Procedure I, II, V |
516.3/ Procedure I, IV |
516.4/ Procedure I, IV |
516.5/ Procedure I, IV |
516.6/ Procedure I, IV |
International Protection Standard | |||||
Dust & Water Protection | IP54/55 |
To meet MIL-810 and IP grade, the 2-pin connector has to be connected.