DM-330MVT Fonte de Alimentação 30A Alinco
R$ 2.313,25 à vista
The SDR You Have Asked For
Faint signals are no longer a challenge for DXers and Contesters around the world, with the new IC-7610. The difference between putting the QSO in the log or trying another time is the capability of your receiver. The high performance RMDR in the IC-7610 has the ability to pick out the faintest of signals even in the presence of stronger, adjacent signals. The IC-7610 introduces dual RF direct sampling receivers. Achieving 100dB RMDR, these receivers rival that of other top-of-the-line transceivers. The IC-7610 also comes with a high-speed, high-resolution, real-time spectrum scope on a 7-inch color display.
|100W (25W AM)|
RF direct sampling system
The IC-7610 employs an RF direct sampling system, where RF signals directly convert to digital data and then processed by the FPGA (Field-Programmable Gate Array). This process reduces distortion that naturally occurs in the various mixer stages found in traditional superhetrodyne receivers.
The RF Direct Sampling System in the IC-7610 is capable of 110 dB* RMDR. This performance gives you the ability to pull weak signals out of the noise of strong adjacent signals. There is a difference you can actually hear as the desired signal comes out of the pileup!
* Representative value at 2 kHz frequency separation (Received frequency: 14.2 MHz, Mode: CW, IF BW: 500 Hz)
Independent dual receiver
Whether listening to both sides of DX station running split, or looking for a multiplier on a different band or mode, the dual receivers in the IC-7610 have you covered. Two separate DIGI-SEL preselectors, two separate Band Pass Filter networks, feed two separate A/D converters into the FPGA.
The DIGI-SEL preselectors are RF filters with sharp, narrow passband characteristics preventing Analog-to-Digital Converter overflow from large out-of-band signals when sampling the RF signals. Additionally the third and higher order IMD components are reduced. This is ideal when strong signals are received in a contest pile-up or from broadcast stations on adjacent frequencies or bands.
Large color touch screen
The large 7” color TFT touch LCD offers intuitive operation of functions, settings, and various operational visual aids such as dual spectrum scope aligned vertically or horizontally, simulated analog meters and RTTY, PSK31/63 mode decoded messages.
The combination of the touch screen and the multi-dial knob offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item by touching the screen and can adjust the levels by turning the multi-dial knob.
Este produto não é comercializado pela Radiohaus no Brasil. Você poderá comprá-lo na Radiohaus America. Nesse caso o equipamento será enviado dos EUA, e para usá-lo legalmente no Brasil, você precisará fazer a homologação simplificada para uso próprio junto a ANATEL. Saiba mais aqui
0.030– 60.000 MHz*1
1.800–1.999, 3.500–3.999, 5.255–5.405*2
7.000–7.300, 10.100–10.150, 14.000–14.350,
18.068–18.168, 21.000–21.450, 24.890–24.990,
28.000–29.700, 50.000–54.000 MHz
*1 Guaranteed range: 0.500–29.999, 50.000–54.000 MHz.
*2 Some frequency bands are not guaranteed.
|Mode||USB, LSB, CW, RTTY, PSK31/63, AM, FM|
|Number of channels||101 (99 regular, 2 scan edges)|
|Antenna connectors||SO-239 × 2 (50 Ω unbalanced (Tuner off))
BNC × 1 (RX antenna In/Out)
|Power supply requirement||13.8 V DC ±15%|
|Operating temperature range||0°C to +50°C; +32°F to +122°F|
|Frequency stability||Less than ±0.5ppm
(0°C to +50°C, after warm up)
|Frequency resolution||1 Hz (minimum)|
23 A (at 100 W output power)
3.0 A (Standby), 3.5 A (Maximum audio)
(projections not included)
|340 × 118 × 277 mm;
13.4 × 4.6 × 10.9 in
|Weight (approx.)||8.5 kg; 18.7 lb|
|Output power (HF/50 MHz)||SSB/CW/FM/RTTY/PSK: 1–100 W
AM: 1–25 W Digital P.S.N.
Digital P.S.N. modulation
Digital low power modulation
Digital Reactance modulation
50 MHz band
Less than –50 dB
Less than –63 dB
|Carrier suppression||More than 50 dB|
|Unwanted sideband||More than 50 dB|
|Microphone impedance||600Ω (8-pin connector)|
|Receiver system||Direct Sampling Superheterodyne|
|Intermediate frequencies||12 kHz|
SSB/CW (at 10 dB S/N)
AM (at 10 dB S/N)
FM (at 12 dB SINAD)
0.5– 1.799 MHz
6.3 μV typ.
1.8– 29.999 MHz
0.16 μV typ.
2.0 μV typ.
28.0– 29.7 MHz
0.5 μV typ.
0.13 μV typ.
1.0 μV typ.
0.32 μV typ.
*3 HF: Preamp 1 ON, 50 MHz: Preamp 2 ON, BW: SSB/CW=2.4 kHz, AM=6 kHz, FM=15 kHz
|Squelch sensitivity (Threshold)||SSB: Less than 3.2 μV (Preamp ON)
FM: Less than 0.32 μV (Preamp ON
|Selectivity (Filter shape: Sharp)
SSB (BW: 2.4 kHz)
CW (BW: 500 Hz)
RTTY (BW: 500 Hz)
AM (BW: 6 kHz)
FM (BW: 15 kHz)
2.4 kHz/–6 dB
500 Hz/–6 dB
500 Hz/–6 dB
6.0 kHz/–6 dB
12.0 kHz/–6 dB
3.6 kHz/–60 dB
700 Hz/–60 dB
700 Hz/–60 dB
15 kHz/–60 dB
20 kHz/–60 dB
|Spurious and image rejection ratio
50 MHz band
More than 70dB
More than 70 dB (Except for ADC Aliasing)
|Audio output power||More than 2.6W at 10% distortion with an 8Ω load|
|Frequency range||1.9–50 MHz bands|
|Matching impedance range||16.7 Ω–150 Ω unbalanced (VSWR better than 3: 1)|
|Tuning accuracy||VSWR 1.5: 1 or less|
|Tuning time||2–3 seconds (average) (Maximum 15 seconds)|
All stated specifications are subject to change without notice or obligation.